Words defined in an open dictionary.

In the Heating, Ventilation, and Air Conditioning industry, the abbreviation HVAC is often used. HVACR stands for Heating, Ventilation, Air Conditioning, & Refrigeration. You can find these terms to describe the industry professionals and the systems they work on. Masters in the HVAC industry like ours here at Rick’s HVAC have the responsibility to correctly design the equipment types, layout, and duct work and ensure the installation is done right. We are often asked about terms that are common in our industry and what they mean when we discuss their existing systems or new, so we decided to give our community some definitions to learn.

Of course, you can always ask our team of professionals what something means anytime you call us for heating or air conditioning services in Pooler, GA. We’re happy to answer any questions you may have, whether it’s about our work, what a word means, or a better explanation of our services. At Rick’s HVAC, we’re here to help.

Here are some common HVAC terms defined:

  • AFUE – An abbreviation standing for Annual Fuel Utilization Efficiency. Your Pooler heating contractor can tell how much of your energy dollar exists as heat inside your home or building. A higher EFUE is always something to shoot for in efficiency.
  • BTU – Stands for British Thermal Unit, which is the amount of heat that is required to increase the temperature of one pound of water by one degree Fahrenheit.
  • BTUH – Similar to the BTU, the term is used to calculate the number of BTUs of energy produced or removed in one hour. This is used for air conditioning and heating.
  • Input BTUH – This is the amount of energy that the cooling or heating unit consumes measured in thousands of BTUs per hour. This figure will always be greater than the output BTUH, see below, because appliances never operate at 100% efficiency.
  • Output BTUH – Is the cooling capacity or heat output that is measured in thousands of BTUs per hour. It is also sometimes referred to as MBTUH. This is a theoretical maximum capacity or output that the appliance COULD deliver to the building.
  • Cooling Capacity – This is the determination of the air conditioning unit or heat pump equipment capacity to cool. One ton of cooling capacity is equivalent to 12,000 BUTs per hour of cooling capacity.
  • EER – Standing for energy efficiency ratio, it is a measurement of the instant energy efficiency of cooling equipment. It is the steady-state rate of heat energy removal by the cooling system in BTUH divided by the steady-state rate of energy input the equipment consumes in Watts.
  • SEER Ratings – This stands for Seasonal Energy Efficiency Ratio and measures the energy efficiency of air conditioning systems over the cooling season. This figure helps you to compare operating costs of the cooling system and lists the total cooling vs. total energy consumed.
  • Watts – Is a measurement of the amount of electricity being used for consumption in a given appliance.
  • Watt Hour – The Wh is a measurement of the amount of air conditioning energy used for an hour of time. For example, if you turn on a 100-watt light bulb for an hour, you are using 100 Wh of energy.
  • RTU – This is an air conditioning and/or heating unit that is placed on the top of a roof, Roof Top Unit. These are common in commercial construction, but are also used in residential construction.

Want to learn more about HVAC terms commonly used by your Pooler air conditioning and heating contractor? Or now that you know some of the above, are you ready to talk with a professional HVAC contractor in Pooler, GA about your heating or air conditioning troubles? Whatever the case may be, you can rely on Rick’s HVAC any time. We’re happy to be the local Pooler air conditioning and heating company businesses and residents in the area turn to for all their HVAC service needs.